KTE7001 <span class=”redtext”>- Not Recommended For New Designs</span>

13.5W Wireless Power Receiver for Wireless Power

KTE7001 <span class=”redtext”>- Not Recommended For New Designs</span>

13.5W Wireless Power Receiver for Wireless Power

This product is shortly to be EOL’d and is therefore not recommended for new designs. Existing customers should contact their local sales office for more information.

The KTE7001 is a single chip, 13.5W wireless power receiver that conforms to WPC/Qi V-1.3 Extended Power Profile (EPP) standard specifications for solutions requiring 9VDC output voltage. A wireless power receiver provides regulated DC output power derived from AC power that is magnetically coupled into a connected wireless power receiver coil.

The KTE7001 integrates a full synchronous rectifier and LDO to efficiently convert the wireless AC power into 9VDC output at up to 1.5A current. The embedded microcontroller with firmware and OTP/ROM memory provides system monitoring, protection, and communications back to the power transmitter.

The KTE7001 is packaged in an advanced, fully “green” compliant, 2.66mm x 3.90mm, 52-bump Wafer-Level Chip-Scale Package (6×9 WLCSP).

  • Single Chip Solution for 13.5W wireless power receiver
  • WPC/Qi V-1.3 EPP Compliant for 9VDC at 1.5A
  • 95% Peak Efficiency LDO mode from Coil to 9VOUT
  • Full Synchronous Rectification with Low-RDSON
  • LDO Mode or Pass-Through Mode configurable
    • 9Voutput at up to 1.5A peak output current
    • Short-circuit and current limit protection
  • Embedded Microcontroller and OTP/ROM Memory
  • Configurable Foreign Object Detection (FOD)
  • Standard Firmware with optional external resistor configuration of FOD operating parameters
  • Device Enable control pin for extremely low power consumption while in disabled mode
  • Proprietary, robust internal Over-Voltage Protection
    • Without any external “Sink” resistor or other devices
  • Optional external NTC Over-Temperature Protection
  • -40°C to 85°C operating temperature range
  • 52-bump WLCSP 2.66 x 3.90mm (0.4mm pitch)
  • Mobile Internet Devices, IoT, Accessories
  • Battery Powered Medical, Industrial, Consumer
  • Wireless Headsets, Headphones, Earbuds
Package Dimensions Package Code
WLCSP69-52 2.66mm x 3.90mm x 0.62mm NAA
Function Input Voltage Range (V) Input Integrated Voltage Clamp (V) Output Voltage Range (V) Output Power (W) Wireless Power Standard
Power Receiver — 25 3.2-5.5 15 WPC/Qi v1.2.4 and v1.3