Home >  Applications >  Networking

Networking

 

Kinetic Technologies provides power management LED lighting control and Ethernet port EMI/ESD and surge protection solutions for Telecom and network switching equipment.

 

+ RGB LED Drivers  

 

Telecom and network switching equipment often use LED indicator lamps show power on or function status. Multiple single color LEDs or multicolor RGB LEDs are used for function indicator lamps. RGB LED drivers allow simplified programmable control of LED color and brightness in an ultra small footprint package device. 

 

  • 3-channel RGB LED drivers permit brightness and color control for a single RGB LED.  These devices may also control 3 discrete LEDs with one IC package device that only requires a single control input signal for all three LEDs
  • 4-channel RGBW devices allow for driving a white LED in addition to the RGB LED or four discrete LEDs.
  • Programming interface options include ExpressWire or I2C to ease integration with a wide variety of processors and operating systems.

 

Part NumberDescriptionPackagePackage Alt.Package Alt.1
KTD2021 3-Channel RGB LED Driver with ExpressWire Control TSOT23-6    
KTD2022 3-Channel RGB LED Driver with ExpressWire Control UTDFN-8 1.5x1.5mm    
KTD2023 4-Channel RGBW LED Driver with ExpressWire Control UTDFN-8 1.5x1.5mm    
KTD2026 3-Channel RGB LED Driver with I2C Control UTDFN-8 1.5x1.5mm    
KTD2027 4-Channel RGBW LED Driver with I2C Control UTDFN-8 1.5x1.5mm    

+ EMI/ESD Protection  

 

The AS1602 is an integrated ESD and Common Mode EMI suppression IC used to improve EMC performance in Ethernet applications. It is built around Kinetic Technologies' patented and proprietary Active EMC suppression technology to enable "Design for Compliance" approach to system design right from the start. This product helps eliminate EMC compliance challenges by providing consistent EMC performance and improvements utilizing silicon based technology as opposed to passive technologies. The AS1602 enables system designers to comply with:

 

  • CISPR22 and FCC Part 15, Class B requirements for Radiated and Conducted Emissions.
  • IEC 61000-4-3/6 requirements for Radiated and Conducted Immunity, Level 3 or higher.
  • IEC 61000-4-2 ESD (Air Discharge) of ±25kV.
  • IEC 61000-4-2 ESD (Contact Discharge) of ±12kV.
  • Cable Discharge Event (CDE) of ±12kV.

 

Part NumberDescriptionPackagePackage Alt.Package Alt.1
AS1602 Dual-channel Active choke for EMI suppression w/ Integrated ESD Protection QSOP-16L (SOIC narrow)    

Copyright © 2017 Kinetic Technologies, a Cayman Corporation. Privacy Policy | Terms of Use